Toujours sous l'OBA
Je note une incohérence entre la flowchart (celle du RB et celle des rat pocket charts) et les règles sur la résolution d'un FFE:C
Sur les diagrammes, si l'on décide de convertir un FFE:C en AR ou en SR le schéma nous indique GotO A ou B selon le cas
Si on converti en ARon va donc au point A, qui se passe sur le schéma APRES le chit draw d'accès, donc pas de chit draw, ce qui lu comme tel permettrai d'enchainer les modules d'OBA sans retester le battery access (tant que le module tombe pas sur ou adjacent a des non-keu uniquement evidement).
Idem pour convertir en SR (point B) qui avec un correction "sur place" passe directement en FFE:1 sans chit draw
Pourtant
1.34 FFE:C: A FFE:C (Continuation) counter is never Corrected, and is resolved only vs each unit that enters or becomes more vulnerable in a hex of its Blast Area (1.51). Its main purpose is to mark the position of the previous FFE:2 counter so that its Observer, after regaining Battery Access in the next PFPh/DFPh (whichever comes first), may place his next SR or FFE:1 counter in that same hex. At the start of each friendly PFPh/DFPh in which an Observer has gained/maintained Radio Contact and has that battery's FFE:C onboard, he must attempt to gain Batter Access as per 1.21. Regardless of the outcome, that previous Fire Mission is now Canceled - but if he gains Access and has a LOS to the FFE's Blast Height during the current phase prior to achieving Access, he must now attempt to perform one of the following for that battery (no other options are possible):
Du coup, lapin compris
Help ?
Merci